Search:

Type: Posts; User: mikus

Search: Search took 0.01 seconds.

  1. Thank you. It now runs fine. Also thank you for...

    Thank you. It now runs fine. Also thank you for video hardware acceleration.
  2. Booting with original nvflash file -- never got...

    Booting with original nvflash file -- never got as far as animation. Appeared to be stuck waiting for wake-up that never came.

    Booting with added boot.img (6184960 bytes) - restarts boot process...
  3. Way back when, someone published the following...

    Way back when, someone published the following (whether true or not, I don't know):

    RAM
    Hynix HY5PS1G831FP-S6 DDR2 SD-RAM 1GB
    SLC
    Hynix HY27UF084G2B 1GB
    NAND
    SanDisk SDIN2C2-8G 8GB
  4. Be sure to hold the power switch and the volume -...

    Be sure to hold the power switch and the volume - for long enough so that __BOTH__ LEDs are lit.
  5. Doing 'dd' to null with Lollipop, I'm getting the...

    Doing 'dd' to null with Lollipop, I'm getting the same read speed (2+MB) on all partitions on the SLC chip, and the same read speed (16+MB) on all partitions on the internal NAND chip (and a read...
  6. Yes - that's why my 02-01-2015, 5:12 PM CST post...

    Yes - that's why my 02-01-2015, 5:12 PM CST post included those two logs (pulled after SOD).

    Have now installed v4 - so far have done (using 'Back' button) only one wake from short sleep (without...
  7. With v3 my Adam mostly wakes from sleep with the...

    With v3 my Adam mostly wakes from sleep with the 'Back' button. But I don't always remember to launch/stop 'Camera': last_kmsg <here> ; last_aplog <here>
  8. Installed boot-cm12-sod&oc_v2.zip (5876376...

    Installed boot-cm12-sod&oc_v2.zip (5876376 bytes). When I then issue 'adb reboot' at the desktop, the Adam freezes and needs manual intervention to perform the reboot. /data/last_aplog <here> ;...
  9. This time around I launched the 'Camera' app -...

    This time around I launched the 'Camera' app - then could not stop it - eventually my repeated attempts to stop 'Camera' caused the Adam to reboot. Launched 'Camera' again, and this time was able to...
  10. After applying boot-cm12-sod_oc-v1.img (6178816...

    After applying boot-cm12-sod_oc-v1.img (6178816 bytes) :

    Still SOD [did not do anything regarding camera] - once Adam goes to sleep, can not be woken with 'back' button - only paper-clip-reset...
  11. Once my Adam goes to sleep (screen goes black),...

    Once my Adam goes to sleep (screen goes black), it can NOT be waken with the 'back' button. And when I do manually reboot it, there is no /proc/last_kmsg.
  12. After booting "dead" Adam: aplog ...

    After booting "dead" Adam: aplog <here> ; no /proc/last_kmsg ; proc/kmsg <here>

    [ Adam evetually started showing "Unfortunately, System UI has stopped" repeatedly. I can get rid of that by...
  13. Install ok, but I'm still encountering hurdles...

    Install ok, but I'm still encountering hurdles upon rebooting -- might stall before showing home page; might come up without mounting SD card; often goes into a forever loop of "System UI has...
  14. Changed /system/etc/adam_preboot to 1000 MHz...

    Changed /system/etc/adam_preboot to 1000 MHz maximum. That allowed me to boot up the Adam.

    Comparing to my other Adam (with latest Slim rom), the voltages with your cm12 rom are about 150 mV...
  15. Basically -- unable to boot. Typically freezes...

    Basically -- unable to boot.

    Typically freezes in the middle of animation; or gets past the boot-up animation but then restarts? before bringing up the home screen. On one attempt I saw a...
Results 1 to 15 of 15