Page 1 of 2 12 LastLast
Results 1 to 10 of 19
Like Tree1Likes

Thread: [L-ROM] Tenchi's Omni-ROM Lollipop Android 5.x for ADAM [WIP]

  1. #1
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts

    [L-ROM] Tenchi's Omni-ROM Lollipop Android 5.1.1 for ADAM [WIP][2015-08-28]

    This is a build of the latest Android Omni ROM Lollipop 5.1.1 ROM. See official omnirom web site for more details. This includes USB fixes from ri9000 and NVOMX, screen capture, and HDMI patches from timduru.

    For now it is a nvflash release as there are some issues with zip file install.

    Currently overclocked to 1.5GHz, to edit PixelQi settings, clock speed, sleep mode and other settings edit /system/etc/adam_preboot.sh

    Install Instructions for Windows NVFLASH package

    1. Download from links below the ROM, any updated boot.img if needed, no google apps download available yet.
    2. Extract nvflash ROM zip file.
    3. Default /system is now 900MB as /cache is no longer big enough to be useful.
    4. Connect Adam via usb to computer.
    5. Set Adam to nvflash recovery mode by holding Volume - and power on.
    6. Goto driver manager in Windows and you should see some APX device, and right click on update the driver for this device.
    7. Set Browse driver to Drivers/Driver32-bit/ and install.
    8. run "fbs.bat" to just install ROM and wait till it finished flashing or run "download.bat" to completely format your Adam internal storage and install complete ROM with ClockWorkMod Recovery and a 650 Meg system partition by default.
    9. Reboot Adam while holding Volume + to go into ClockWorkMod recovery.
    10. Wipe data/factory reset. (This will wipe all data from your internal sdcard and the cache).
    11. Install Google apps.zip and SuperSU to root if needed.
    12. Skip to step 16 if you don't need to flash an updated boot.img
    13. Reboot while holding volume - to go into nvflash recovery again.
    14. Copy downloaded boot.img into your nvflash directory or extract boot.img from ROM.zip (if no updated boot image is available).
    15. Run "flashboot.bat boot.img" in command line.
    16. Restart after it is finished flashing and you will boot into your new Kitkat ROM.

    How to install ROM and Google Apps zips from ClockworkMod

    1. Download the zip and ADB and USB drivers ZIP in download section.
    2. Follow "How to install ADB driver" instructions below.
    3. Make sure you have an alternate keyboard pre-installed before installing Google Apps otherwise you will get force closes of AOSP keyboard all the time. Use 'adb install filename.apk' when booted into ROM or browse and open apk using file manager to install keyboard (see hacker's keyboard apk link in downloads).
    4. Power on Adam in recovery mode by holding Volume + and toggling power switch.
    5. On PC in command prompt type 'cd "adb directory"'
    6. If you want to install to micro sdcard refer to link for setup details: Booting from sdcard much faster! and Type 'adb shell setprop sdboot 1'.
    7. Type 'adb shell mount -a' ignore the errors (try again if you don't see any error message).
    8. If installing new ROM type adb shell rm -rf /system/* to remove previous ROM files and do Wipe Data/Factory Reset.
    9. Type 'adb push file.zip /external_sd/' (should see files being transferred to microsd).
    10. On Adam use volume keys or middle 2 soft touch keys to navigate up and down to "Install zip".
    11. Press top soft key button to enter selection.
    12. Navigate and enter to /storage/external_sd.
    13. Navigate and enter to your file.zip file.
    14. Navigate and enter to Yes to install, should be no errors.
    15. Reboot your Adam once the transfer is complete.

    How to install ADB driver

    1. Extract the ADB zip with archive utility like WinZip or WinRAR.
    2. Run UniversalAdbDriverSetup6.msi.
    3. Connect Adam to computer via USB.
    4. Right click on "My Computer" in File Explorer.
    5. Click on "Device Manager".
    6. Should see "Notion" with exclamation mark.
    7. Right click on "Notion" and select "Update Driver Software".
    8. Select "Browse my computer for driver software".
    9. Select "Let me pick from a list of device drivers on my computer".
    10. Select "Android Device" and press Next.
    11. Select "Asus Transformer ADB Interface" and press Next.
    12. Ignore Update Driver Warning and press Yes.
    13. Should now see Android Device\Asus Transformer ADB Interface in devices.

    How to obtain adam logs to report problems

    1. Follow instructions above on How to install ADB driver.
    2. Connect Adam to computer via USB.
    3. Power on Adam with ROM you are having problems with to capture log and do what you did you get the problem.
    4. Launch Windows command prompt and type cd "path to platform-tools".
    5. Type "adb wait-for-device pull /data/aplog".
    6. If you get remote object '/data/aplog/ does not exist' goto step 8.
    7. Type "adb pull /data/dmsg".
    8. Goto step 13 if step 5 and 7 were successful.
    9. Type "adb shell".
    10. Type "cd /data".
    11. Type "logcat -d > aplog".
    12. Type "dmesg > dmsg".
    13. Type "cat /proc/kmsg > kmsg &".
    14. Press CTRL-C to exit shell.
    15. Type "adb pull /data/aplog".
    16. Type "adb pull /data/dmsg".
    17. Type "adb pull /data/kmsg".
    18. You should now have 3 files in your platform-tools directory, aplog, dmsg, and kmsg.
    19. Launch Web browser and goto Pastebin.com - #1 paste tool since 2002!.
    20. Open aplog in wordpad and copy and paste all text to web page and submit.
    21. Create a new message in this thread and paste the URL from pastebin.com of your newly submitted log.
    22. Repeat 19-20 for dmsg and kmsg.

    Download links:

    Omni ROM Lollipop for ADAM:

    5.1.1:
    download 2015-08-28 CWM ZIP with micro sdcard install option

    Updated boot image for those having issues:
    download 2015-03-12 boot.img

    5.1.0:
    download 2015-03-11 NVFLASH

    SuperSU for root access:
    download

    ClockworkMod 6.0.4.7 Recovery with nvflash (run "flashrecovery.bat recovery.img" in command line):
    download CWM with battery indicator from Borkata and working USB thanks to ri9000

    ADB with USB drivers (usb_driver folder contains older version which will work with ClockworkMod although you need to allow unsigned drivers to install) download

    Download PA Google Apps (Biggest package that can be installed is Mini version)

    Download Google apps (Manually extract and copy /system directory to Adam as cwm install isn't working)

    Download PA Google Apps 5.1 Beta

    Hacker's Keyboard Download APK

    Source download links:

    OMNI ROM: download

    Device tree and kernel source: download

    Vendor tree: download

    Tested and working:

    [2015-08-28]
    -issue showing all notifications
    -no boot animation
    -Splashtop black screen
    -Youtube 720p playback freezes
    -stagefright vulnerability patched
    -reverted to old power off timers for more stable reboot/shutdown
    -prevent dofstrim freeze by skipping /data and /system partitions so it can deep sleep properly
    -increased nominal voltages for stable reboot/shutdown
    -fixed bluetooth file transfer issue

    [2015-03-03]
    -USB Audio working
    -SOD fix with OC enabled, wake with Back button
    -hwcomposer hdmi fix
    -PowerHAL for cpu boost on touch and 1GHz battery saving mode
    -mic fix
    -cpu clock reduced to 1.5GHz and voltages decreased for better battery life
    -vpn working
    -Screen capture
    -lp2 mode sleep disabled by default now to allow for stable usb connection can be re-enabled in /system/etc/adam_preboot.sh, for adams not waking properly uncomment keepawake line
    -Pixel Qi toggle app
    -Wifi
    -Bluetooth A2DP
    -HDMI
    -GPS should be working

    Not working:
    -HW Accelerated video
    -sleep mode
    -sometimes touch screen doesn't respond, just slide power switch and then press side back button
    -Camera app not functional, use alternative camera app like Camera MX
    -Compass
    -3G (removed due to issues)

    Credits
    Borkata for making such an excellent kernel and CM ports and help with problems

    ri9000 for usb fixes

    timduru for NVOMX, screen capture fixes and HDMI fix

    Omni ROM developers for providing Android ROM
    Last edited by tenchi; 08-28-2015 at 08:38 PM. Reason: ROM Update
    tartutic07 likes this.

  2. The Following 8 Users Say Thank You to tenchi For This Useful Post:

    Antonio (03-12-2015), fantaze (03-25-2015), Macktion (03-17-2015), mikus (03-12-2015), Prema (04-11-2015), ri9000 (03-12-2015), Trans (08-29-2015), ZenOgeek (03-12-2015)

  3. #2
    Resident
    Join Date
    May 2011
    Location
    Austin, TX
    Posts
    509
    Thanks
    115
    Thanked 50 Times in 34 Posts
    Does not boot for me -- the animation wiggles forever. Directly captured: logcat <here> ; dmesg <here>

  4. #3
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts
    Quote Originally Posted by mikus View Post
    Does not boot for me -- the animation wiggles forever. Directly captured: logcat <here> ; dmesg <here>
    android.database.sqlite.SQLiteException: Can't downgrade database from version 120 to 118

    Would indicate you didn't do full /data and /cache format, which is required in this case.

  5. #4
    Resident
    Join Date
    May 2011
    Location
    Austin, TX
    Posts
    509
    Thanks
    115
    Thanked 50 Times in 34 Posts
    Quote Originally Posted by tenchi View Post
    android.database.sqlite.SQLiteException: Can't downgrade database from version 120 to 118

    Would indicate you didn't do full /data and /cache format, which is required in this case.
    Thank you - I redid all the wipes, now my Adam boots.

    At least initially, the Adam was too eager to go to a blank (dark gray) mostly-unresponsive state, for example when I was trying to change settings. Typically got "settings is not responding" dialog; eventually dark gray screen was replaced by 'unlock' screen.

    [Right now, home screen seems to have a combination of native launcher icons and replacement launcher icons.]

  6. #5
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts
    Quote Originally Posted by mikus View Post
    Thank you - I redid all the wipes, now my Adam boots.

    At least initially, the Adam was too eager to go to a blank (dark gray) mostly-unresponsive state, for example when I was trying to change settings. Typically got "settings is not responding" dialog; eventually dark gray screen was replaced by 'unlock' screen.

    [Right now, home screen seems to have a combination of native launcher icons and replacement launcher icons.]
    Hmm.. I wonder why it is so unstable for you, maybe the voltages are too low for your Adam causing these weird problems. I will try posting a new boot image with previous voltages.

  7. #6
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts
    Updated boot.img on front page with raised nominal core voltages for those having some issues.

  8. #7
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts
    Google Apps for 5.1 are now available but in beta, see front page.

  9. The Following User Says Thank You to tenchi For This Useful Post:

    ri9000 (03-14-2015)

  10. #8
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts
    Getting really good battery life with this ROM, about 7 hours on a full charge, only got 5.5 in Kitkat, and even less on 5.0.

  11. The Following User Says Thank You to tenchi For This Useful Post:

    ri9000 (03-18-2015)

  12. #9
    Regular
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    398
    Thanks
    110
    Thanked 25 Times in 19 Posts
    Quote Originally Posted by tenchi View Post
    Getting really good battery life with this ROM, about 7 hours on a full charge, only got 5.5 in Kitkat, and even less on 5.0.
    Hi Tenchi, which kernel are you using? Did you notice any difference to battery life with u/v kernel?

  13. #10
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts
    Quote Originally Posted by ri9000 View Post
    Hi Tenchi, which kernel are you using? Did you notice any difference to battery life with u/v kernel?
    Actually it was using u/v kernel half the time.

Page 1 of 2 12 LastLast

Remove Ads

Similar Threads

  1. Replies: 130
    Last Post: 12-19-2017, 07:59 AM
  2. Replies: 133
    Last Post: 12-06-2015, 11:55 AM
  3. Replies: 8
    Last Post: 08-21-2015, 09:17 PM
  4. Replies: 37
    Last Post: 07-04-2015, 12:04 PM
  5. [KK-ROM] OMNI ROM Android 4.4.2 KitKat for ADAM [WIP]
    By tenchi in forum Kit Kat (ADAM)
    Replies: 166
    Last Post: 09-20-2014, 06:00 PM

Search tags for this page

android.database.sqlite.sqliteexception: can't downgrade database from version 120 to 118

,

sh l710t battery saving rom

Click on a term to search for related topics.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •