Page 1 of 5 123 ... LastLast
Results 1 to 10 of 49

Thread: [KK-ROM] Paranoid Android ROM 4.4 KitKat for ADAM [WIP]

  1. #1
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts

    [KK-ROM] Paranoid Android ROM 4.4 KitKat for ADAM [WIP]

    This is a build of the latest Paranoid Android AOSP ROM which I quote:
    "Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project."

    The ROM is pre-rooted and some code from Lollipop is used in Paranoid Android.

    For more information see: Paranoid Android ? Official

    You will need the latest ClockworkMod Recovery 6.0.4.7 to install this ROM and may have to increase system size if installing full Google Apps package.

    Install Instructions for Windows

    1. Download from links below the ROM, any updated boot.img, google apps if needed, and ClockWorkMod.
    2. Extract ClockWorkMod recovery zip.
    3. Connect Adam via usb to computer.
    4. Set Adam to nvflash recovery mode by holding Volume - and power on.
    5. Goto driver manager in Windows and you should see some APX device, and right click on update the driver for this device.
    6. Set Browse driver to Drivers/Driver32-bit/ and install.
    7. run "flashrecovery.bat recovery.img" in command line and wait till it finished flashing or drag recovery.img onto flashrecovery.bat.
    8. Transfer ROM.zip to your sdcard on Adam.
    9. Reboot Adam while holding Volume + to go into ClockWorkMod recovery.
    10. Wipe data/factory reset. (This will wipe all data from your internal sdcard and the cache).
    11. Install ROM.zip in ClockWorkMod.
    12. Install Google apps.zip if needed.
    13. Install SuperSU.zip if need root access.
    14. If you don't need to update boot.img skip to step 17, reboot while holding volume - to go into nvflash recovery again.
    15. Copy downloaded boot.img into your nvflash directory.
    16. Run "flashboot.bat boot.img" in command line.
    17. Restart after it is finished flashing and you will boot into your new Kitkat ROM.

    How to obtain adam logs to report problems

    1. Download ADB and USB drivers zip below in download section.
    2. Extract zip and run UniversalAdbDriverSetup6.msi.
    3. Connect Adam to computer via USB.
    4. Power on Adam with ROM you are having problems with to capture log and do what you did you get the problem.
    3. Launch Windows command prompt and type cd "path to platform-tools".
    4. Type "adb wait-for-device pull /data/aplog".
    6. If you get remote object '/data/aplog/ does not exist' goto step 8.
    7. Type "adb pull /data/dmsg".
    8. Goto step 13 if step 4 and 7 were successful.
    9. Type "adb shell".
    10. Type "cd /data".
    11. Type "logcat -d > aplog".
    12. Type "dmesg > dmsg".
    13. Type "cat /proc/kmsg > kmsg &".
    14. Press CTRL-C to exit shell.
    15. Type "adb pull /data/aplog".
    16. Type "adb pull /data/dmsg".
    17. Type "adb pull /data/kmsg".
    18. You should now have 3 files in your platform-tools directory, aplog, dmsg, and kmsg.
    19. Launch Web browser and goto Pastebin.com - #1 paste tool since 2002!.
    20. Open aplog in wordpad and copy and paste all text to web page and submit.
    21. Create a new message in this thread and paste the URL from pastebin.com of your newly submitted log.
    22. Repeat 19-20 for dmsg and kmsg.

    Download links:

    Paranoid Android ROM v4.6 beta 5-Kitkat 4.4.4 for ADAM:

    download micro sdcard boot version with latest HDMI and USB audio fixes

    micro sdcard boot recovery and setup info

    download 2014-11-01 zip

    Get Google Apps for Android 4.4.x here: download

    ClockworkMod 6.0.4.7 Recovery with nvflash (run "flashrecovery.bat recovery.img" in command line):
    download CWM with battery indicator from Borkata and working USB thanks to ri9000

    ADB with USB drivers (usb_driver folder contains older version which will work with ClockworkMod although you need to allow unsigned drivers to install) download

    Source download links:

    Paranoid Android ROM: download

    Device tree and kernel source: download

    Vendor tree: download

    Tested and working:

    [2014-11-01]
    Wifi
    Pixel Qi Mode
    HDMI
    Bluetooth with A2DP
    Camera:
    -now vertically flips properly when set to front camera
    -more stable image when taking picture
    -faster frame rates with movies
    USB should work better hopefully
    Youtube
    Install apk from sdcard working
    Overclocked by default to 1.6GHz

    Not working:
    Cellular radio
    USB re-plugging may not work
    Camera still a work in progress with unsteady flickering image sometimes
    Compass
    Chrome browser tabs

    Credits
    Borkata for making such an excellent kernel and CM ports and help with problems

    ri9000 for usb fixes

    Paranoid Android ROM developers for providing Android ROM
    Last edited by tenchi; 05-04-2015 at 03:14 PM. Reason: sdcard version

  2. The Following 9 Users Say Thank You to tenchi For This Useful Post:

    Borkata (11-01-2014), jrmr (11-02-2014), Loftus (02-13-2015), mikus (11-02-2014), ri9000 (11-02-2014), Trans (11-03-2014), wowwowvj (11-01-2014), ZenOgeek (11-03-2014), ZilcH (11-26-2014)

  3. #2
    Member
    Join Date
    Sep 2011
    Location
    Newcastle, England
    Posts
    82
    Thanks
    7
    Thanked 4 Times in 3 Posts
    Hi Tenchi.....Excellent work....I will check this out now...!

    Cheers!!

  4. #3
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts
    I am getting very low power usage with this ROM only 4% used per hour which was prevously about 15% even using Wake Lock. This must be what we will expect from Lollipop which is great.

  5. The Following User Says Thank You to tenchi For This Useful Post:

    wowwowvj (11-03-2014)

  6. #4
    Member
    Join Date
    Sep 2011
    Location
    Newcastle, England
    Posts
    82
    Thanks
    7
    Thanked 4 Times in 3 Posts
    HI Tenchi...it was all good till I downloaded SuperSU from Google Play.

    I am now getting this error message:


    "unfortunately, settings has stopped"
    "unfortunately, omniswich has stopped"
    "unfortunately, mobile data has stopped"
    "unfortunately, KeyguardTestActivity has stopped"

    I have since reformatted internal memory by NVFLASH...and flashed the ROM again after wipe cache and factory reset. I am using CWM recovery 6.0.4.7. But still the same.

    Probably need to revert to Eden, JB and reflash KK. But cannot find link for Eden...any chance you could send me one?

    Edit: I searched and came across this from Borkata:

    QTE
    Don't flash Eden. Download Tenchi's nvflash package from here https://mega.co.nz/#!b043GSba!4bvmbd...ntD6d8mU6koWlA
    It will resize your system partition and flash recovery that should do the trick.
    Then boot to recovery factory reset and flash this ROM.

    UNQTE

    Trying it now...!

    Thanks,
    Goldy
    Last edited by goldysan63; 11-02-2014 at 12:42 PM.

  7. #5
    Member
    Join Date
    Sep 2011
    Location
    Newcastle, England
    Posts
    82
    Thanks
    7
    Thanked 4 Times in 3 Posts
    Quote Originally Posted by goldysan63 View Post
    HI Tenchi...it was all good till I downloaded SuperSU from Google Play.

    I am now getting this error message:


    "unfortunately, settings has stopped"
    "unfortunately, omniswich has stopped"
    "unfortunately, mobile data has stopped"
    "unfortunately, KeyguardTestActivity has stopped"

    I have since reformatted internal memory by NVFLASH...and flashed the ROM again after wipe cache and factory reset. I am using CWM recovery 6.0.4.7. But still the same.

    Probably need to revert to Eden, JB and reflash KK. But cannot find link for Eden...any chance you could send me one?

    Edit: I searched and came across this from Borkata:

    QTE
    Don't flash Eden. Download Tenchi's nvflash package from here https://mega.co.nz/#!b043GSba!4bvmbd...ntD6d8mU6koWlA
    It will resize your system partition and flash recovery that should do the trick.
    Then boot to recovery factory reset and flash this ROM.

    UNQTE

    Trying it now...!

    Thanks,
    Goldy
    Still no luck....

    I am now in unsuccessful booting recovery kernel image ....need Eden and then Jb I guess...

  8. #6
    Regular
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    398
    Thanks
    110
    Thanked 25 Times in 19 Posts
    Quote Originally Posted by goldysan63 View Post
    Still no luck....

    I am now in unsuccessful booting recovery kernel image ....need Eden and then Jb I guess...
    you shouldn't need to go back to eden. nvflash will repartition for you but you will need to manually format /system, & /data from cwm before you install your rom. I do a reboot after formatting too.

  9. #7
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts
    The ROM is pre-rooted so it doesn't need supersu, maybe conflicts with it... Also if anyone lhas issues with phone stopped working just remove the telephony apks in /system/app and /system/priv-app/ in recovery adb.
    Last edited by tenchi; 11-02-2014 at 07:00 PM.

  10. #8
    Resident
    Join Date
    May 2011
    Posts
    803
    Thanks
    15
    Thanked 531 Times in 203 Posts
    Also can try to download and drag new cwm from front page onto flashrecovery.bat in that nvflash directory and that should work.

  11. #9
    TR ELITE TEAM
    Join Date
    Apr 2011
    Posts
    1,147
    Thanks
    82
    Thanked 833 Times in 225 Posts
    Quote Originally Posted by goldysan63 View Post
    Still no luck....

    I am now in unsuccessful booting recovery kernel image ....need Eden and then Jb I guess...
    If you insist on Eden go to notionink site, then Adam2 and then search for links for Adam 1. They have original stored in Dropbox account.
    I drink Beer
    Like my work - buy me one.

  12. #10
    Member
    Join Date
    Sep 2011
    Location
    Newcastle, England
    Posts
    82
    Thanks
    7
    Thanked 4 Times in 3 Posts
    Borkata, Tenchi and ri9000...

    Many thanks guys for your advice....will try them....
    Notion Ink dumped us but you guys are doing a stellar work here...much appreciated...

    Cheers!

Page 1 of 5 123 ... LastLast

Remove Ads

Similar Threads

  1. [KK-ROM] KatKiss Android 4.4 KitKat ROM for ADAM [WIP]
    By tenchi in forum Kit Kat (ADAM)
    Replies: 57
    Last Post: 12-21-2014, 07:00 AM
  2. [KK-ROM] PAC-MAN 4.4 KitKat UNOFFICIAL ADAM ROM [WIP]
    By tenchi in forum Kit Kat (ADAM)
    Replies: 197
    Last Post: 11-26-2014, 08:00 PM
  3. [KK-ROM] Slim ROM Android 4.4 KitKat for ADAM [WIP]
    By tenchi in forum Kit Kat (ADAM)
    Replies: 62
    Last Post: 10-21-2014, 08:50 PM
  4. Best kitkat for adam needed
    By mnnbht3 in forum Kit Kat (ADAM)
    Replies: 45
    Last Post: 09-28-2014, 06:55 PM
  5. [KK-ROM] OMNI ROM Android 4.4.2 KitKat for ADAM [WIP]
    By tenchi in forum Kit Kat (ADAM)
    Replies: 166
    Last Post: 09-20-2014, 06:00 PM

Search tags for this page

could not load library libsigchain.so from ld preload for /system/bin/sh

,
cwm 6.0.5.1 adam notion ink
,
install zip from sideload vmax
,

keyguardtestactivity

,

keyguardtestactivity has stopped

,

kk aplog

,

paranoid 4.4.2 kit-kat rom

,
unfortunately keyguardtestactivity has stopped
,
unfortunately kryguardtestactivity has stopped
,
unfortunately, keyguardtestactivity has stopped
Click on a term to search for related topics.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •